Lenze 2175 - 15 Table of Keywords

CANopen
8 Table of keywords
8-1
L BA2175 EN 2.0
8 Table of keywords
8200 inverter series, 6-59
8200 vector
Control word, 6-20
Status word, 6-21
82XX, Status word, 6-21
82XX
Control word, 6-20
Status word, 6-21
93XX
Control word, 6-23
Status word, 6-26
A
Address setting, 5-2
AIF-IN, Function block, 6-24
AIF-OUT, Function block, 6-27
Application, as directed, 1-2
Application as directed, 1-2
Application conditions, 3-2
Assignment of the plug/socket connector, 4-3
B
Basic insulation, 4-4
Baudrate,3-2,3-3
Baud rate setting, 5-3
C
CAN bus, Wiring, 4-6
CAN bus system, Assembly, 4-5
Code numbers, Access via the fieldbus module, 6-5
Code numbers / index, Conversion, 6-5
Codes, Lenze, 6-5
Commissioning, 5-1
Communication medium, 3-2
Communication profile, 5-1
Communication profile setting, 5-1
Communication times, 3-3
Connection
Connections of the fieldbus module, 4-3
Plug-in terminal (5 pole), 4-3
Control word, 6-13
8200 vector, 6-20
82XX, 6-20
93XX, 6-23, 6-26
Controller
Application as directed, 1-2
Labelling, 1-2
D
Definitions, 1-1
Dimensions, 3-2
DIP switch settings / CANopen, 5-1
Disposal, 1-2
E
Electrical isolation, 4-4
Example
Read block parameters, 6-12
Read parameter, 6-10
Write parameter, 6-11
F
Fault elimination, 7-1
Fieldbus module, Conne ctions, 4-3
Frequency setpoint, 6-13
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com
Show/Hide Bookmarks