D9U001MCX-0101_03
125
Fig. i-Drive Power Mains Switch with Label
Fig. i-Drive Power Emergency Retraction Button Label
1. i-Drive Power Mains Switch
2. i-Drive Power Emergency Retraction Button
17.7.6 Powered Drive
CAUTION!
Damage to property due to incorrect transport and involuntary movement!
► Prior to transport, ensure that the bed is disconnected from the mains.
► Prior to transport, ensure that the auxiliary outlet plug (if available) is disconnected from the mains.
► Ensure that the castors are locked prior to assembly, disassembly and maintenance (e.g.: i-Drive Power mainte-
nance).
► Ensure that the castors are locked when the bed is occupied.
► Hang the mains cable on the appropriate hook on the bed during transport.
1. Check, if the mains switch of i-Drive Power is activated.
2. Press the button
on the Activation Panel. The i-Drive Power wheel will lower and the LED will ash.
3. Place your hand on the Safety Sense touch sensor (1) and push the button
or button or button .
Your hand must be placed on the Safety Sense sensor to use the i-Drive Power, if released, the i-Drive Power will stop.
4. The i-Drive Power motor is immediately stopped and the electric brake is activated after pressing the red button
when braking or in emergency.
5. i-Drive Power control system is automatically deactivated and the electric brake is activated if no i-Drive Power function is
used for 3 minutes. This is signalized by the green LED which is extinguished after 3 minutes.
1
2
To Next Page
Loading...
Need help?
General
