LINET Multicare X User Manual

D9U001MCX-0101_03
151
19.11.1 Vertical Oxygen Bottle Holders
19.11.2 Horizontal Oxygen Bottle Holder
Fig. Adaptor 11029700A0000 for Vertical Oxygen Bottle Holder
4MAR2010PC007-1
Fig. Places for Vertical Oxygen Bottle Holders (sleeve ttings on
accessory adaptor)
Fig. Places for Horizontal Oxygen Bottle Holder
Maximum diameter of an oxygen bottle in the Vertical Oxygen Bottle Holders 4MAR2010PC004 and 4MAR2010PC007-1 is 14 cm.
Maximum diameter of an oxygen bottle in the Vertical Oxygen Bottle Holder 4MAR2015PC001 is 11 cm.
WARNING!
Adaptor 11029700A0000 must be xed on the head end Accessory Adaptor by the original screw before use!
Maximum Load of the properly installed Adaptor 11029700A0000 is 25 kg.
To place Vertical Oxygen Bottle Holders on the bed:
► Put Vertical Oxygen Bottle Holder on the sleeve ttings in the accessory adapter on head end. Vertical Oxygen Bottle
Holder 4MAR2010PC007-1 can be placed to the sleeve ttings of the Adaptor for Oxygen Bottle Holder 11029700A0000.
► Ensure the locking pin (or pins) of Vertical Oxygen Bottle Holder is (are) locked in the sleeve tting of the compatible adap-
tor.
► Put Horizontal Oxygen Bottle Holder on
crossbar on the head end of the bed.
► Secure the oxygen bottle against falling or invo-
luntary movement with rubber strap.

LINET Multicare X Specifications

General

Brand	LINET
Model	Multicare X
Category	Medical Equipment
Language	English