D9U001MCX-0101_03
43
GO BUTTON
The button activates the keyboard of all Control Elements, except for Lateral Tilt Foot Control.
Pressing button
will keep the keyboard active for 3 minutes.
Pressing a button will keep the keyboard active for another 3 minutes.
During this time the following is possible:
► Adjusting individual Mattress support platform elements by pressing the corresponding positioning buttons.
► Disabling individual functions with the lock buttons.
NOTE: To activate CPR function (button
) the button is not needed.
STOP BUTTON
Pressing button immediately stops all electronic bed movements.
12.1 Multiboard X
The Multiboard X is the main control element for the caregivers. It consists of LCD touchscreen and keyboard and it is integrated in
the outside of both head siderails.
► Ensure that exclusively trained nursing sta operates the Multiboard X.
Fig. Multiboard X (LCD touchscreen and keyboard)
1 2 3 4 5 6 7 8
1. Emergency Trendelenburg Posi-
tion Button
2. CPR (Resuscitation) Position
Button
3. Autocontour Adjustment
Buttons (simultaneous movement
of the Backrest and Thighrest)
4. Backrest Adjustment Buttons
5. Thighrest Adjustment Buttons
6. Bed Height Adjustment Buttons
7. Central STOP Button (press to
interrupt bed positioning)
8. GO Button (press to activate
control elements)
Positioning buttons 3, 4, 5 and 6 are
explained in chapter „13 Bed Positio-
ning“ on the page 77.
To Next Page
Loading...
Need help?
General
