Technical Information
124
G 1xxx/G 2xxx
2 Function
2.1 General Operation
2.1.1 Novotronic Controls
1. Make sure that the spray arms are not blocked.
2. Close the door.
3. Turn on the dishwasher. The “Start” indicator will flash.
4. Select a wash program by turning the program selector switch to the left
or right.
5. Press the Start button.
2.1.2 Touchtronic/Navitronic Controls
1. Make sure that the spray arms are not blocked.
2. Close the door.
3. Turn on the dishwasher by touching the
s control.
4. The main menu is shown in the display. See Figure 080-1.
5. If the memory function is selected, then the last selected program is displayed.
Figure 080-1: Touchtronic/Navitronic Main Menu
6. Select the desired program according to the type of load and soiling.
7. The display changes to the program menu.
8. Options can be added to the selected program. See Figure 080-2.
Figure 080-2: Selected Program Display
Note:
Information about the selected program can be displayed by touching the i
control.
9. Select the desired options; a √ will appear next to the option selected.
See Figure 080-3.
To Next Page
Loading...
Need help?
General
