Programme chart
101
Chemical protective suits programmes
Protective suits is a programme for washing chemical protective clothing of fire
brigades.
A chemo-thermal disinfection (60°C/20min.) is carried out, for which suitable
detergents are to be used.
Protective suits 60 °C Fill ratio/Load
size
Fabric Chemical protective suits made of multi-layer
laminate
PW 811 -
1 suit
PW 814 -
1 suit
PW 818 -
2 suits
Programme
sequence
Disinfection 60°C, 20min.
3 rinses
Protective suits special 40 °C
Fabric Chemical protective suits made of multi-layer
laminate
Programme
sequence
Pre-wash 40°C
Observe the recommendation of the protective suit manufacturer regarding maximum
wash temperature.
In the case of unidentified soiling, check decontamination, as this is not guaranteed and
must be checked.
To remove external contamination, close the suits before using the "Protective suits
special" programme. For internal and external disinfection with the "Protective suits"
programme, open the suits. To protect the visor, fold the hood inwards and place the leg
part over it.
Observe the minimum load of the washing machine so that the suits do not spread apart
and damage the visors. Or prevent the unfolding of the suits by washing in a suitably
large washing net.
Heavily contaminated suits should be pre-washed using the "Protective suits special"
programme.
To Next Page
Loading...
Need help?
General
