Go to target programme and confirm.
Select the target programme number and confirm.
Go to target area and confirm.
Select the target area Pre-wash, Main wash or Rinse and confirm.
If the target area is not available (no name defined yet), the area
number and the standard area name appear (target area: Pre-wash,
Main wash, Rinse).
Enter and activate by pressing the "Save" button.
Copying will be carried out.
Useful tip: If copying to a target programme place that is already
occupied by an area, the security question will appear.
Press the "Save" button to overwrite.
The overwriting process is carried out and the screen returns to the
"Copy" sub-menu.
Useful tip: When is pressed, or if after 30seconds no button has
been pressed, copying is not carried out and the display returns to
the "Copy" sub-menu.
Copy block
With this menu option a block can be copied out of one existing
programme into another programme or within a programme. A new
block is added into the target programme.
If there are already 10 blocks in the target area, the 10thBlock is
omitted. If a block is not copied into an existing target area, the new
target area is automatically allocated the relevant name.
Select the block to be copied.
When this is selected, the display will show the following:
Press the multifunction selector, select the source programme
number and confirm your selection.
To Next Page
Loading...
Need help?
General
