Programming
134
Programme name
Select the Programme name menu option.
When this is selected, the display will show the following:
Material number
Programme name
Supervisor level
Programme header
xxxxxxxxx
:
:
Jump to the "Programme name" input field.
Select a character and press the multifunction selector.
The selected character will appear in the "Name" field.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Programme name
: _ _ _ _ _ _ _
0123456789
a -> A
Use the a->A function button to toggle between upper and lower
case.
Use the function button to delete a character and move one field
to the left.
Material number
Select the Material number input field.
Turn the multifunction selector to the right.
The material number can only be read and not changed. In the case
of newly created programmes by the operator, xxxxxxxxx appears
here.
Area 1 - 2 - 3
Select input field Area 1
Turn the multifunction selector to the right.
Area 1
Area 2
Create
Programme header
: No
:
No
You have the following options:
– No
– 1 block to 10 blocks
If a quantity of blocks is defined, an area name must also be
assigned. This can be assigned under" "Name area 1". As a first
proposal, the area 1 "Pre-wash", area 2 "Main wash" and area 3
"Rinse" will appear here. See also "Programme structure".
To Next Page
Loading...
Need help?
General
