Washing without dispensing drawer
28
Continuing the programme after a "Dispensing system
fault" message
When the dispenser container is empty, the pump and the machine
switch themselves off and the washing machine indicates a lack of
liquid detergent.
Fill the dispenser container.
Press the "Start"button to continue the programme.
Amount to be dispensed
Please follow the detergent manufacturer's instructions.
It is particularly important to observe manufacturer's instructions
when using a combination of cleaning agents and special
application products. Products must only be used for applications
approved by the manufacturer to avoid any material damage or the
occurrence of strong chemical reactions. Confirmation must be
sought from the detergent manufacturer that using the agent in the
washing machine will not cause damage.
Correct dosage also depends on the viscosity of the liquid agent. It
should therefore be allowed to settle to room temperature before
being used.
To Next Page
Loading...
Need help?
General
