Options:
– Yes
– No
Password
The use of a password can be deselected here.
Set whether or not you want to use a password.
Options:
– Yes
– No
However, if a password has already been assigned and the operator
then selects "No", they will be prompted to enter the current
password when they press .
Medium water
pressure
Medium water pressure must be set in order to calculate
consumption data. This is used, among other things, for calculating
water quantities in individual blocks or for a whole programme.
Options:
– 0.1 to 50bar
– 1 to 800psi
Heater power
Options:
– 0to999.9kW
To Next Page
Loading...
Need help?
General
