Enter the target programme number and copy it using the "Save"
button.
If you wish to copy to a target programme place that is already
occupied by another programme, the security question will appear.
If the storage space available is insufficient to accept the selected
programme, the following message will appear in the display:
"Insufficient controller memory" will flash in the display.
Press the "Save" button to overwrite.
The overwriting process is carried out and the screen returns to the
"Copy" sub-menu.
Useful tip: When is pressed, or if after 30seconds no button has
been pressed, copying is not carried out and the display returns to
the "Copy" sub-menu.
Copy area
With this menu option a section from an existing programme can be
copied to another programme. In the target programme, a non-
existent section is added or the existing section is overwritten.
Select the area to be copied.
When this is selected, the display will show the following:
Press the multifunction selector, select the source programme
number and confirm your selection.
Go to the source area and confirm.
Select the source area Pre-wash, Main wash or Rinse and confirm.
To Next Page
Loading...
Need help?
General
