Programming
136
Minimum water
level
When Minimum water level is selected, all blocks without heating are
allocated the minimum water level.
This value configures the lowest selectable level value.
The maximum value is 300 mm.
Min. water level
Fill type
Create
Programme header
:
:
100 mm
Water level mm
Select the menu option "Minimum water level".
You have the following options:
– From 0 in 2 mm increments up to a maximum of 300mm.
Enter the minimum water level.
Fill type
With the Fill type option the type and method of water intake can be
specified for the programme.
If the Fill type is changed in the programme header when the
programme is created, the basic settings for the levels are saved
again in the blocks.
Fill type
Access control
Create
Programme header
:
:
Yes
Auto load adjustment mm
You have the following options:
– Automatic load adjustment mm
In programmes which are started with Automatic load adjustment,
the laundry load influences water levels, dispensing and the
number of rinse cycles.
– Water level mm
When Water level mm or Automatic load adjustment are selected,
the option "Concentration m/l" is locked in the Dispensing menu
option and the Block programming.
– Water volume l
– Laundry to suds ratio kg/l
To Next Page
Loading...
Need help?
General
