Washing
36
Procedure in the event of a programme interruption
during operation
If the programme is interrupted when there is water remaining in the
machine or during a spin, the following (for example) will appear in
the display:
The door is locked.
Do not attempt to open it using force.
Press the "Drainage" button or select the "Separate drain"
programme and press "START".
Open the door at the end of the programme.
If no further wash programmes are planned:
Switch off the machine with the 0"Power Off" button.
Switch off at the on-site mains electricity switch.
Close the on-site supply valves for water and steam.
To Next Page
Loading...
Need help?
General
