Washing by card operation
37
Washing by card operation
Cards with at least one programme are intended for a particular type
of machine. Blank cards can be used in any machine.
Switch on the machine with theI "Power On" button.
The welcome screen will appear in the display.
Insert the card.
The programmes on the card will appear in the display.
Select a programme by turning the multifunction selector. Press the
multifunction selector to highlight the programme.
Select the highlighted programme by pressing the multifunction
selector.
Press the "START" button.
The programme will start running.
Useful tip: After the "START" button has been pressed, the card can
be removed from the card reader. The programme will be deleted at
the end of the programme.
Do not insert any objects other than the card into the card slot.
If the card is inserted into the slot the wrong way, the following
message will appear in the display: