Access to Supervisor level / Changing the password
115
Password
The supervisor level is accessed by entering a four-digit password
from the character set provided. It can only be selected at the start or
end of a programme.
Press the button.
The following will appear in the display:
Settings Back
Main menu
Supervisor level
Language
When "Supervisor level" is selected and the multifunction selector is
pressed, the password entry screen will appear.
The first time you access the supervisor level, enter the password
"M1LE".
Password: _ _ _ _
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Select letter or number.
When the multifunctionselector is operated, the character selected
will appear in the corresponding position.
If no function is carried out within 30seconds, if the button is
pressed, or if an incorrect password is entered, the same display
content will be shown as after a power cut.
Retrieving data for the last password entry and last incorrect
password entry.
Press the "Info" button.
The date of the last password entry and the last incorrect password
entry will appear.
Password information
Last entry: 11:18 21.5.2015
Last incorrect entry: 11:15 11.5.2015
With this function it is possible to check whether other people know
the password and have used it.
Press the "Back" button.
If no other button is pressed, the screen will automatically revert to
the previous one after 30seconds.
To Next Page
Loading...
Need help?
General
