Miele PW 814 User Manual

Programming
149
29. Drain level
A water level can be selected. A residual amount of water can remain
in the suds container until the high-speed spin starts. For certain
types of laundry this results in an optimal distribution of laundry
during spinning to minimise unbalances. No drum rotation takes
place.
 Choose from the following options:
– Water level
0mm to Level1or2
30. Wash time 4
Settings as for Wash time 1.
In Wash time4 the drain is permanently open.
31. Drain path 2
Settings as for Drain path 1.
32. Free spin
speed selection
Programming spin speed
 Choose from the following options:
– No
The machine always spins at the spin speed programmed in the
block. Changing the spin speed before the programme is started is
not possible.
– Yes
The spin speed setting, selected for the last programme block before
the start of a programme, is assumed for the appropriate programme
blocks. Regardless of whether "Yes" or "No" is programmed in the
last block for the programme step "Free spin speed selection".
Changing the spin speed before the programme is started is possible.
33. Spin
Creating a user defined spin profile.
 Choose from the following options:
– No
No spin is carried out.
– Automatic
Spin profile
Phase 1 2 3 4 5 6
Duration 1 min. 1 min. 1 min. 3 min. 3 min. 2 min.
Rhythm No 12/3 No No No 12/3
Spin speed
[rpm]
500 30 500 850 Max. 30
– User defined
To create a spin profile, 6different spin phases can be programmed
for each spin stage.

Miele PW 814 Specifications

General

Brand	Miele
Model	PW 814
Category	Washer
Language	English