Programming
174
Settings
With this menu option settings from the Supervisor level can be
copied from the card to the controls.
Existing programmes in the controls will be overwritten.
Select the "Settings" menu option.
Dispensing
Data to control unit
:
Settings
13:40 10.05.15
Press the multifunction selector.
The security question will appear.
SettingsData to control unit
Overwrite existing data?
Press the "Save" button to confirm.
During data transfer the following appears in the display:
Settings
Data to control unit
Delete data from
card
All data on the card can be deleted with this menu option.
Select the "Delete data from card" menu option.
Supervisor level
Main menu
Delete data from card
Data to control unit
Press the multifunction selector to confirm your selection.
The following will appear in the display:
Supervisor level
Delete data from card
No data available to delete
All data has been deleted.
Useful tip: If there are wash programmes on the card, for example,
these can be deleted individually.
Select the wash programme you want to delete.
To Next Page
Loading...
Need help?
General
