Programming
179
After setting, press the "START" button to start the "Drain with
agitation" programme.
If drain with drum rotation has taken place, the programme will be
ended.
Useful tip: The programme will also be ended if the button is
pressed.
Spin
The spin speed can be set.
Press the "Spin" button.
Manual control
Spin
rpm:
1150 rpm
Set the spin speed.
After setting, press the "START" button to start the "Spin"
programme.
If spinning has taken place, the programme will be ended.
Useful tip: The programme will also be ended if the button is
pressed.
Manual control
Level:
0 Temperature 22:
rpm: No 0Disp. amount:
°C
ml
mm
Press the "Stop / Finish" button to end selected functions.
Useful tip: Manual control is ended by pressing the "Stop / Finish"
button again.
Function
combinations
Water inlet, dispensing, washing and heating can be selected
simultaneously in any combination*.
Water inlet Dispensing Washing and
heating
Drain with
agitation
Spin
* all possible function combinations are highlighted in grey
To Next Page
Loading...
Need help?
General
