01-8
Replacement of Fuel Filter
- Lubricant
Location Points of application Kinds Quantity
2 Gasket contact surfaces of fuel filter and fuel filter head Engine oil As required
0 Special tools Unit : mm {in.}
Location Tool name and shape Part No. Application
2 Filter wrench MH061572 Removal of fuel filter
01882
MAINTENANCE OPERATIONS
94.2 {3.71}
WARNING–
• Fuel ignites easily. Do not get it near flame or heat.
• Wipe up any gas oil that has been spilled because it can cause a
fire.
• Do not use an unsuitable filter because it can cause a fire.
[Removal]
13824
13825
0
2
B
B
1
A
A
[Installation]
• Install by tightening three quarters to one full turn after contact surface
A of fuel filter head 1 makes contact with gasket B of fuel filter 2. Be
sure to tighten by hand.
• After installation, run the engine and check for fuel leakage.