01-27
01
Engine Oil
Ê Tightening torque Unit : N·m {lbf.ft, kgf·m}
Location Parts to be tightened Tightening torque Remarks
3 Oil pan drain plug 69 {51, 7} —
[Inspection]
• Pull out dipstick 1, wipe off the oil with a cloth.
• Reinsert dipstick 1, then pull it out carefully.
• Oil level is correct if there is oil sticking to dipstick 1 within the hatched
area.
• If the level is low, top it up.
• Tilt the cab.
02196
02176
[Replenishment]
• Clean the area surrounding oil filler cap 2 and prevent dust from
entering through the filler.
• Remove oil filler cap 2 and top up with engine oil.
• Wait five minutes before checking the oil level.
• Replace filler cap 2.
WARNING–
• Wipe up any engine oil that has been spilled because it can
cause a fire.
• Do not touch the engine while it is hot as it will burn you.
CAUTION–
Take care not to spill engine oil on the V-belts, because this
would cause them to slip, reducing service life.
02196
1
2
To Next Page
Loading...
Need help?
General
