Mitsubishi FUSO FH 1997 User Manual

11-47
11
02025
(2) Clearance between piston ring and ring groove
• If the measured value is higher than the limit, replace the faulty
parts.
• Measure using feeler gauge F, by pressing 1st compression ring 5
against piston 8 with straight edge G.
NOTE
• Measurement has to be conducted around the whole periphery
of piston 8 after removing carbon deposits.
• Be sure to exchange the whole set of piston rings 5 to 7 as a
set if any of the rings is faulty.
02026
8
5
F
G

Mitsubishi FUSO FH 1997 Specifications

General

Brand	Mitsubishi
Model	FUSO FH 1997
Category	Trucks
Language	English

Summary

Group 00 General Information

Precautions for Maintenance Operation

Standard Tightening Torques

Hex-head Bolt and Stud Bolt Torques

Hex-head Flange Bolt Torques

Group 01 Maintenance Schedule

Maintenance Operations Procedures

Lubrication Procedures

Group 10 Engine Removal and Installation

Engine Removal and Installation Procedures

Procedures for removing and installing the engine and related parts.

Group 11 Engine Details

Engine Specifications

Technical specifications for the engine model.

Engine Structure and Operation

Details the engine's construction and operational principles.

Engine Troubleshooting Guide

Guides for diagnosing and resolving engine-related problems.

Engine Inspection and Adjustment

Procedures for inspecting and adjusting engine components while installed.