To Next Page

To Previous Page

01-38

Brake Fluid

Ê Tightening torque Unit : N·m {lbf.ft, kgf·m}

Location Parts to be tightened Tightening torque Remarks

2 Air bleeder 7.8 to 12 {5.8 to 8.5, 0.8 to 1.2} —

LUBRICATION

- Fluid

Location Points of application Specified fluid Quantity

1 Fluid tank Brake fluid As required

(SAE J1703f or FMVSS No.116 DOT3)

0 Special tools Unit : mm {in.}

Location Tool name and shape Part No. Application

2 Vinyl hose MH033102 Air bleeding

1200 {47.2}

ø7 {0.28}

00328

WARNING–

• The clutch fluid system and the brake fluid system use the fluid

tank in common.

• You must use new brake fluid (SAE J1703f or FMVSS No.116

DOT3). Do not add different quality fluid or mineral oil (gas oil,

engine oil, gear oil, automatic transmission fluid, etc.) to the

clutch system, because this will cause the rubber parts of the

clutch system and brake system to swell, resulting in faulty

clutch operation, as well as ineffective braking and brake drag-

ging.

• Do not allow foreign particles or water to become mixed into the

brake fluid when refilling, because this will result in ineffective

clutch and brake operations.

• If you use a mug for adding brake fluid, keep it solely for that

purpose.

CAUTION–

• Be careful not to splash brake fluid on related parts as this could

damage the paintwork.

• Be sure to wipe off brake fluid immediately if you splash it on the

paintwork.

NOTE

Supply and maintain brake fluid level to the "MAX" level of the

fluid tank .

Mitsubishi FUSO FH 1997 User Manual

Questions and Answers: