Mitsubishi FUSO FH 1997 User Manual

01-31
01
Manual Transmission Gear Oil
Ê Tightening torque Unit : N·m {lbf.ft, kgf·m}
Location Parts to be tightened Tightening torque Remarks
1 Inspection plug 69±15 {51±11, 7±1.5} —
2 Drain plug 69±15 {51±11, 7±1.5} —
- Sealant
Location Points of application Kinds Quantity
1 Thread area of inspection plug THREEBOND 1105D As required
2 Thread area of drain plug THREEBOND 1105D As required
WARNING–
The engine is hot immediately after the vehicle stopped, so take
care not to burn yourself.
[Inspection and replenishment]
• Remove inspection plug 1 and check whether the oil level is up to the
edge of the entrance.
• If the level is low, add oil through the inspection plug hole until the
level comes up to the edge of the entrance.
02199
02336
[Replacement]
• Drain the oil after removing inspection plug 1 and drain plug 2.
• Remove any metal particles sticking to the magnetic part of drain plug
2 before reinstalling the plug.
• Add oil through the inspection plug hole until the level comes up to the
edge of the entrance.
• Insert inspection plug 1.
2
1

Mitsubishi FUSO FH 1997 Specifications

General

Brand	Mitsubishi
Model	FUSO FH 1997
Category	Trucks
Language	English

Summary

Group 00 General Information

Precautions for Maintenance Operation

Standard Tightening Torques

Hex-head Bolt and Stud Bolt Torques

Hex-head Flange Bolt Torques

Group 01 Maintenance Schedule

Maintenance Operations Procedures

Lubrication Procedures

Group 10 Engine Removal and Installation

Engine Removal and Installation Procedures

Procedures for removing and installing the engine and related parts.

Group 11 Engine Details

Engine Specifications

Technical specifications for the engine model.

Engine Structure and Operation

Details the engine's construction and operational principles.

Engine Troubleshooting Guide

Guides for diagnosing and resolving engine-related problems.

Engine Inspection and Adjustment

Procedures for inspecting and adjusting engine components while installed.