Mitsubishi FX3U Series Operation Manual

FX Configurator-FP Operation Manual
Functions and Use of This Manual
6
Functions and Use of This Manual
FX Configurator-FP is the setting/monitor tool for use with a personal computer.
FX Configurator-FP is a setting/monitor tool for the FX
3U-20SSC-H positioning block and the servo amplifier
applicable to SSCNETIII can perform the parameter setup, the table information setting, the monitor, and the
test.
FX Configurator-FP
FX Configurator-FP
FX 3U -20SSC-H
FX
3U -20SSC-H
For specification and parts names
Installation Manual
PLC
FX
3U Series
FX
3UC Series
For wiring and installation of PLC:
Hardware manual
User's Manual - Hardware Edition
Supplied Manual
Servo amplifier, Servo motor
Obtain the instruction manual of the servo motor that is to be
connected to your system.
This manual will be needed to set the parameters for the servo
amplifier or write the servo amplifier.
Additional Manual
Supplied Manual
This Manual
Operation manual
Installation and Operation procedure
Describes the servo parameter
setting for the test/monitor mode
and other parameters.
Operating instructions and program examples
User's manual
Supplied Manual

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English