Mitsubishi FX3U Series Operation Manual

8 Debug in the positioning
8.1 Monitor
68
FX Configurator-FP
Operation Manual
8.1.2 Signal monitor
Monitoring the status information and servo status information.
1 Double-click [File name]  [Monitor]  [Operation monitor]  [Signal] in the
file data list.
[Status signal] tab in [Signal] dialog box appears.
2 Click the status tab to be monitored.
• Click [Status signal] tab to display the status signal.
• Click [Servo status signal] tab to display the servo status signal.
1. Status signal tab
2. Servo status signal tab
Item Description
Unit ready flag
Displays each
flag status
along X/Y-axis
as follows
on : ON
off : OFF
READY/BUSY flag
Zero point return completion flag
Positioning completion flag
Present value overflow
Error flag
Forward rotation pulse outputting
flag
Reverse rotation pulse outputting flag
Table operation flag
In m code ON flag
In remaining distance drive standby
flag
In speed change processing flag
In target address change
processing flag
In servo parameter transfer flag
In saving flag
Initializing flag
Positioning parameter change
completion flag
Item Description
Zeroing over
Displays each
flag status
along X/Y-axis
as follows
on : ON
off : OFF
Zero speed
Ready ON
Servo ON
Alarm
In-position
Torque control
Absolute position lost
Warning

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English