Mitsubishi FX3U Series Operation Manual

8 Debug in the positioning
8.1 Monitor
69
FX Configurator-FP
Operation Manual
1
Introduction
2
Install Uninstall Start&Exit
3
Window and Operation Config
4
Creating Files
5
Data set
6
Setting The Connection
7
Data flow And Procedure
8
Debug In the Positioning
9
Print
10
Edit Function In data
8.1.3 Operation status monitor
Monitoring the detailed operation status along X/Y-axis.
1 Double-click [File name]  [Monitor]  [Operation monitor]  [X-axis Opera-
tion status] / [ Y-axis Operation status] in the file data list.
[Axis control data] tab in [X/Y-axis Operation status] dialog box appears.
2 Click the tab to be monitored.
• Click [Axis control data] tab to display the axis control data.
• Click [JOG/MPG] tab to display the JOG/MPG.
• Click [Servo monitor] to display the servo monitor
1. Axis control data tab
Item Description Note
Target address1 Displays target address1 [Unit : User unit]
 For [user unit], refer
to Section 5.1
Operation speed1 Displays operation speed1 [Unit : User unit]
Target address2 Displays target address2 [Unit : User unit]
Operation speed2 Displays operation speed2 [Unit : User unit]
Override setting Displays the override setting [Unit : 0.1%]
Torque output setting value Displays the torque output setting value [Unit : 0.1%]
Velocity change value Displays the Velocity change value [Unit : User unit]
 For [user unit], refer
to Section 5.1
Target position change
value (address)
Displays Target position change value (address)
[Unit : User unit]
Target position change
value (speed)
Displays Target position change value (speed)
[Unit : User unit]
This window displays [X-axis
Operation status] dialog box.

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English