Mitsubishi MT160D User Manual

j
g
~e
IS
1e
lS-
Straightedge
Measure clearance A
(3) Place the straightedge on axle housing (B)
and read the clearances C and D.
Subtract D from C, and call the differ-
ence B.
(4) Select from the shim stock (mentioned
above for backlash adjustment) such an
amount as to obtain A - B = 0 to 0.1 111m
(0 to 0.004 in.).
Straightedge
Measure
clearance C
C-D=8
Measure clearance D
FRONT AXLE & STEERING LINKAGE SYSTEM
Reassembling the axle housing
(1) Coat the mating faces of two housings (A)
and (B) with the sealant, and attach the
selected shim to the face of housing (B).
Put the two housing together and j'osten
them by tightening the bolts to this torque
value:
Tightening torque
2.5 ~ 3.0 kg-m
(18 ~ 22 ft-Ib)
(2) Attach the axle housing to the chassis and
insert the center pin to complete the axlc-
to-chassis
connection. Be sure to apply the
grease in th e grease cham ber.
(3) Select such a shim as will produce 0 to 0.2
111m (0 to 0.008 in.) clearance between the
axle housing and center pin. Insert the
shim into between the chassis and center pin
and tighten til e bolts.
C:~--
Chassis
Thickness
Shim set
0.2 mm (0.008 in.)
0.6 mm (0.024 in.)
1.0 mm (0.04 in.)
Tightening torque
~ Center pin
Part No.
10190621 000
1119 0605 000
11190605 100
1119 0605 200
5.0 ~ 6.0 kg-111
(36 ~ 43 ft-Ib)
(4) Be sure that the axle hOLlsing as connected
to the chassis is capable of smooth rocking
motion.
4-9
i
j

Mitsubishi MT160D Specifications

General

Brand	Mitsubishi
Model	MT160D
Category	Tractor
Language	English