Mitsubishi MT160D User Manual

Symptoms and possible causes
Glow plugs
Governor
Not enough output power
a) Glow plugs are burnt out
b) Glow plugs do not become red
hot
a) Governor control lever is set to
a wrong position
b) Governor spring
is off
Symptoms and possible causes
Poor compression
Maladjusted fuel injec-
a)
Improper fuel injection timing
tion system
b) Injected fuel
quantity is not
enough
c) Fuel injection pressure
is too low
Fuel
is not reaching a) Air is trapped in fuel circuit
injection
pump
b) Fuel filter is clogged
c) Fuel
tank is not clean
Insufficien t in take air Clogged air cleaner
Overheating
a) Cooling water shortage
b) Loose fan V-belt
c)
Radiator is clogged or leaking
d) Fuel injection
is mis-timed
e) Engine oil shortage
Engine oil
consumption rate is high
Symptoms and possible causes
Oil leakage
a) Defective oil seals
b) Blown gear case gasket
c) Loose gear case
mounting bolts
d) Loose drain plug
e) Loose oil pipe connectors
ENGINE
Remedy
a) Replace glow plugs.
b) Check and correct lead wire
connections.
a) Reset
it to the start position.
b) Correct.
Remedy
Refer to a), poor compression
"Starting difficulties," above.
a) Adjust fuel injection timing.
b) Overhaul
or replace injection
pump.
c) Check injection nozzles and
adjust pressure.
a) Check connectors and retighten.
b) Clean filter
or replace elemen t.
c) Clean fuel tank.
Clean air cleaner and replace
element.
a) Add cooling water.
b) Adjust
or replace V-bel t.
c) Clean or replace radiator.
d) Adjust fuel injection timing.
e) Add engine oil.
Remedy
a) Replace oil seals.
b) Replace gasket.
c) Retighten.
d) Retighten.
e) Retighten.
f) Blown rocker cover gasket f) Replace gasket.
g) Loose rocker cover mounting bolts g) Retighten.
2·55

Mitsubishi MT160D Specifications

General

Brand	Mitsubishi
Model	MT160D
Category	Tractor
Language	English