Nokia 7210 SAS-M User Manual

Boot Options
124
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
TiMOS BOOT LOADER
...
4.1.4 7210 SAS Boot Options and Procedures
The location of the boot.tim bootstrap image varies per 7210 SAS platform and
depends on the storage locations supported by the platform. The boot option modes
to find and load the boot.tim bootstrap image file also vary per 7210 SAS platform.
This section provides information about the supported boot option modes and
storage locations for the following 7210 SAS platforms:
• System Boot Options on 7210 SAS-M
• System Boot Options on 7210 SAS-T, 7210 SAS-R6, and 7210 SAS-R12
• System Boot Options for 7210 SAS-Mxp, 7210 SAS-S 1/10GE, 7210 SAS-Sx1/
10GE, and 7210 SAS-Sx 10/100GE
• System Boot Options for 7210 SAS-Sx 1/10GE, 7210 SAS-S 1/10GE,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp in Satellite Mode
• System Boot Options for 7210 SAS-Mxp, 7210 SAS-S 1/10GE, 7210 SAS-Sx1/
10GE, and 7210 SAS-Sx 10/100GE in Standalone Mode
4.1.4.1 System Boot Options on 7210 SAS-M
This platform supports the following options to retrieve the boot.tim and TiMOS
images (both.tim) required to boot the system:
• local storage — internal flash (cf1:\)
• network (with auto-init mode)
• network (without auto-init mode)
During bootup, the bootrom searches for the boot.tim in the following locations in the
specified order, and uses the image obtained from the first location where boot.tim is
found to load the bootstrap image:
Note: The use of a boot.tim file on a USB storage for booting up is not supported on the
7210 SAS-M. The boot.tim is present in cf1:\, or the golden bootstrap image in cf1:\ is used.
The 7210 SAS-M supports the use of only a both.tim (TiMOS image) file on the USB storage
device.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English