Boot Options
176
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Figure 22 Front Panel: 7210 SAS-Sx 10/100GE 64SFP+ 4QSFP28
4.10.3.7 Configuring BOF Parameters
See the following sections for sample output of a BOF configuration on 7210 SAS
platforms:
• Sample Output: BOF Configuration for 7210 SAS-M, 7210 SAS-T, and
7210 SAS-Mxp
• Sample Output: BOF Configuration for 7210 SAS-R6
• Sample Output: BOF Configuration for 7210 SAS-R12
• Sample Output: BOF Configuration for 7210 SAS-Sx/S 1/10GE
4.10.3.7.1 Sample Output: BOF Configuration for 7210 SAS-M, 7210 SAS-T, and
7210 SAS-Mxp
The following is a sample output of a BOF configuration for the 7210 SAS-M,
7210 SAS-T, and 7210 SAS-Mxp.
A:7210>show# bof
===============================================================================
BOF (Memory)
===============================================================================
primary-image ftp://*:*@xxx.xxx.xxx.xx//import/panos_builds/nightly/
2.0 /S80/MTU-sultan/
primary-config tftp://xx.xxx.xx.xxx/MTU/mtu3DGP.cfg
#eth-mgmt Port Settings:
eth-mgmt-disabled
#uplinkA Port Settings:
uplinkA-port 1/1/24
uplinkA-address xx.xxx.xx.xx/24
uplinkA-autoneg
uplinkA-duplex full
uplinkA-speed 1000
uplinkA-vlan 0
#uplinkB Port Settings:
uplinkB-port 1/1/2
uplinkB-address 0
uplinkB-autoneg
uplinkB-duplex full
uplinkB-speed 1000
hw0744