CLI Usage
30
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
The <Ctrl-c> keystroke interrupts a monitoring process. Monitor command
configurations cannot be saved. You must enter the command for each monitoring
session. Note that if the maximum limits are configured, you can monitor the
statistical information for a maximum of 60 * 999 sec ~ 1000 minutes.
The CLI monitor command are described in Table 8.
2.3 Getting Help in the CLI
The help system commands and the ? key display different types of help in the CLI.
Table 9 describes the different help commands.
Table 8 CLI Monitor Command Contexts
Command Description
filter Enables IP, IPv6 and MAC filter monitoring at a configurable
interval until that count is reached.
lag Enables Link Aggregation Group (LAG) monitoring to display
statistics for individual port members and the LAG.
port Enables port traffic monitoring. The specified port(s) statistical
information displays at the configured interval until the configured
count is reached.
router Enables virtual router instance monitoring at a configurable
interval until that count is reached.
service Monitors commands for a particular service.
Table 9 Online Help Commands
Command Description
help ? List all commands in the current context.
string ? List all commands available in the current context that start with
string.
command ? Displays the command’s syntax and associated keywords.
command keyword
?
List the associated arguments for keyword in command.
string<Tab> Complete a partial command name (auto-completion) or list
available commands that match string.
To Next Page
Loading...
Need help?
General
