7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Boot Options
Edition: 01 3HE 16132 AAAB TQZZA 179
- Saving a Configuration to a Different Filename
- Rebooting
4.11.1 System Administration Commands
Use the following administrative commands to perform management tasks.
CLI Syntax: A:ALA-1# admin
auto-init stop
check-golden-bootstrap
debug-save [<file-url>]
disconnect [address <ip-address> | username <user-
name> | {console|telnet|ftp|ssh}]
display-config
[no] enable-tech
reboot [upgrade][auto-init][now]
save [file-url] [detail] [index]
set-time <date> <time>
tech-support <file-url>
update-golden-bootstrap [file-url]
4.11.1.1 Viewing the Current Configuration
Use one of the following CLI commands to display the current configuration. The
detail option displays all default values. The index option displays only the persistent
indexes. The info command displays context-level information.
CLI Syntax: admin# display-config [detail|index]
info detail
The following is a sample configuration file.
*A:sim169# admin display-config
# TiMOS-B-0.0.I218 both/i386 NOKIA SAS-M 7210 Copyright (c) 2016.
# All rights reserved. All use subject to applicable license agreements.
# Built on Fri Sep 26 20:46:58 IST 2016 by panosbld in /panosbld/ws/panos/main
# Generated THU JUN 23 19:19:22 2016 UTC
exit all
configure
#--------------------------------------------------
echo "System Configuration"
#--------------------------------------------------
system
To Next Page
Loading...
Need help?
General
