Nokia 7210 SAS-M User Manual

System Management
348
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
ALA-1>admin# disconnect
ALA-1>admin# Logged out by the administrator
Connection to host lost.
C:\>
6.11.4.4 Set-time
Use the set-time command to set the system date and time. The time entered should
be accurate for the time zone configured for the system. The system will convert the
local time to UTC before saving to the system clock, which is always set to UTC. If
SNTP or NTP is enabled (no shutdown), this command cannot be used. The set-
time command does not take into account any daylight saving offset, if defined.
Use the following syntax to set the date and time.
CLI Syntax: admin
set-time date time
The following example shows the command usage to set the date and time.
Example: admin# set-time 2007/02/06 04:10:00
The following is a sample output of the set-time command.
ALA-2# admin set-time 2007/02/06 04:10:00
ALA-2# show time
Thu Feb 2 04:10:04 GMT 2007
ALA-2#
6.11.4.5 Display-config
The display-config command displays the running configuration of the system.
Use the following syntax to display the running configuration of the system.
CLI Syntax: admin
display-config [detail] [index]
The following example shows the command usage to display the running
configuration of the system.
Example: admin# display-config detail

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English