Boot Options
212
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
no tertiary-dns [ip-address]
Context bof
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the tertiary DNS server for DNS name resolution. The tertiary DNS
server is used only if the primary DNS server and the secondary DNS server do not respond.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and
also when defining file URLs. DNS name resolution is not supported when DNS names are
embedded in configuration files.
The no form of this command removes the tertiary DNS server from the configuration.
Default no tertiary-dns
Parameters ip-address — Specifies the IP address of the tertiary DNS server.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
4.12.2.2 Show Commands
bof
Syntax bof [cflash-id | booted]
Context show
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command shows the BOF executed on last system boot or on the specified device.
If no device is specified, the BOF used in the last system boot displays. If the BOF has been
modified since the system boot, a message displays.
Parameters cflash-id — Specifies the cflash directory name.
Values uf1: (7210 SAS-M)
cf1: | cf2: | uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE (standalone and
standalone-VC), 7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
To Next Page
Loading...
Need help?
General
