Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 677
Description This command enables the context to individually clear (re-enable) a previously failed
reference. As long as the reference is one of the valid options, this command is always
executed. An inherent behavior enables the reverted mode which causes a re-evaluation of
all available references.
Parameters ref1 — Clears the first timing reference.
ref2 — Clears the second timing reference.
bits1 — Clears the BITS1 port reference. This keyword is only supported on
7210 SAS-Mxp, 7210 SAS-T, 7210 SAS-R6 and 7210 SAS-R12 platforms.
bits2 — Clears the BITS2 port reference. This keyword is only supported on 7210 SAS-T
and 7210 SAS-Mxp platforms.
trace
Syntax trace log
Context clear
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document
Description This command allows an operator to clear the trace log.
6.12.2.4 Debug Commands
sync-if-timing
Syntax sync-if-timing
Context debug
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables the context to debug synchronous interface timing references.
force-reference
Syntax force-reference {ref1 | ref2 | bits1 | bits2 | ptp}
no force-reference
Context debug>sync-if-timing

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English