File System Management
98
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
The scp command copies files between hosts on a network. It uses SSH for data
transfer, and uses the same authentication and provides the same security as SSH.
The source file for the scp command must be local. The file must reside on the
router. The destination file has to be of the format: user@host:file-name. The
destination does not need to be local.
Use the following CLI syntax to copy files:
CLI Syntax: file>
copy source-file-url dest-file-url [force]
scp local-file-url destination-file-url [router router
name | service-id] [force]
The following example shows command syntax usage:
Example: A:ALA-1>file cf1:\ # copy 104.cfg cf1:\test1\test2\test3\test.cfg
A:ALA-1>file cf1:\ # scp file1 admin@192.168.x.x:cf1:\file1
A:ALA-1>file cf1:\ # scp file2 user2@192.168.x.x:/user2/file2
A:ALA-1>file cf1:\ # scp cf1:/file3 admin@192.168.x.x:cf1:\file3
3.2.4 Moving Files
Use the move command to move a file or directory from one location to another.
Use the following CLI syntax to move files:
CLI Syntax: file>
move old-file-url new-file-url [force]
The following example shows command syntax usage:
Example: A:ALA-1>file cf1:\test1\test2\test3\ # move test.cfg cf1:\test1
cf1:\test1\test2\test3\test.cfg
A:ALA-1>file cf1:\test1\test2\test3\ # cd ..
A:ALA-1>file cf1:\test1\test2\ # cd ..
A:ALA-1>file cf1:\test1\ # dir
Directory of cf1:\test1\
05/04/2006 07:58a <DIR> .
05/04/2006 07:06a <DIR> ..
05/04/2006 07:06a <DIR> test2
05/04/2006 07:58a 25278 test.cfg
1 File(s) 25278 bytes.
3 Dir(s) 1056256 bytes free.
A:ALA-1>file cf1:\test1\ #
To Next Page
Loading...
Need help?
General
