Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Boot Options
Edition: 01 3HE 16132 AAAB TQZZA 141
Figure 9 System Initialization: TiMOS Boot
4.2.2 BOF Chassis-Role and Host-Type Parameters for
7210 SAS-Sx 1/10GE, 7210 SAS-S 1/10GE,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp
On the 7210 SAS-Sx 1/10GE, 7210 SAS-S 1/10GE, 7210 SAS-Sx 10/100GE and
7210 SAS-Mxp, the operator can configure the chassis-role and host-type boot
parameters to operate the 7210 SAS node in standalone mode or satellite mode. The
values configured for these parameters must be consistent for boot up to proceed
correctly. Table 22 describes the boot loader action when the chassis-role and
host-type parameters are set to one of the allowed values.
The bof>host-type command can be set to one of the following values:
• none (factory default setting)
• standalone
sw0476
Apply downloaded
configuration
Load TiMOS
TiMOS boot up
T
Boot process
complete
Send trap to SNMP
Reset to factory
default,
hard reboot
Boot process
complete
Send trap to SNMP
Ping safe-boot IP
address if
configured (in BOF)
Three trials with
5 minute intervals
Yes
Yes
No
No
Booting
for first time?
Or
Booting after reset to
factory default?
Ping response received
for safe-boot IP address within
15 minutes?

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English