CLI Usage
74
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command displays timestamps in the CLI session.
2.9.2.3 Show Commands
alias
Syntax alias
Context <root>
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command shows a list of existing aliases.
Output The following output is an example of alias information, and Table 15 describes the output
fields.
Sample Output
A:ALA-103>config>system# show alias
==============================================================================
Alias-Name Alias-command-name
==============================================================================
sri show router interface
sse show service service-using epipe
ssvpls show service service-using vpls
ssi show service service-using ies
------------------------------------------------------------------------------
Number of aliases : 5
==============================================================================
A:ALA-103>config>system#
Table 15 Output Fields: Alias
Label Description
Alias-Name Displays the name of the alias
Alias-command-name The command and parameter syntax that define the alias
Number of aliases The total number of aliases configured on the router