Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
File System Management
Edition: 01 3HE 16132 AAAB TQZZA 93
• The boot.tim and BOF can be stored on one of these locations: cf1:\ or cf2:\ or
uf1:\. The bof.cfg is stored in the same location as the boot loader (boot.tim)
used to boot the system. For example, if the boot loader (boot.tim) on cf2:\ is
used to boot the system, the BOF created during auto-init or manual intervention
during first-time boot will be created on cf2:\ and used subsequently.
• TiMOS images (both.tim) can be stored in one of these locations: cf1:\ or cf2:\ or
uf1:\, with appropriate configuration of the BOF (that is, primary, secondary, and
tertiary locations pointing to the appropriate place).
• The ndx and sdx files are generated at the location specified in the BOF
parameter of the configuration file. If the user does not specify the location in the
BOF, the ndx and sdx files are in the same location as the default configuration
file. The default configuration file is created in the same location as the TiMOS
image used to boot the system.
For example, if no configuration file location is specified in the BOF and the
TiMOS image (both.tim) located in uf1:\ is used to boot the system, the default
configuration file, the index file, the sdx file, and nvsys.info file created on uf1:\
and used subsequently. If the user specifies cf2:\ as the location of the
configuration file in the BOF, the configuration file, the index file, the sdx file, and
nvsys.info file are created on cf2:\ and used subsequently.
For more information about the use of storage locations on 7210 SAS-R6 and
7210 SAS-R12 when using redundant CPM configuration, see Configuration
Guidelines for Synchronization of Active and Standby CPM on 7210 SAS-R6 and
7210 SAS-R12.
3.1.4 Configuration Guidelines for Storing the TiMOS,
boot.tim, bof.cfg, ndx, sdx, and nvsys.info File
The following are configuration guidelines for storing files.
• Store the boot.tim and bof.cfg on cf1:\. Create a backup of the boot.tim and
bof.cfg on cf2:\ or uf1:\.
• Store the both.tim, configuration file (and as a result, the ndx, sdx, and
nvsys.info) on cf2:\. Create regular backups of these files in one of the following
locations: cf2:\ or uf1:\ or create a backup on SAM (Service Access Manager) or
the network management station.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English