OkiLAN 8200e Network User’s Guide
176
Installing NetBEUI Protocol
Windows XP
Although you can install the NetBEUI protocol into Windows XP, it is not
supported. You should be able to use NetBEUI on LAN connections although
you will not be able to use this on Remote Access Service Connections.
1. Click [Start] → [Settings] → [Control Panel].
2. Double-click [Network Connections].
3. Right-click the adapter to which you wish to add NetBEUI.
4. Click [Properties].
5. On the [General] tab, click [Install].
6. Click [Protocol] → [Add].
7. Click [Have Disk] and insert your Windows XP CD.
8. Open the Valueadd\msft\net\netbeui folder, click the Netnbf.inf file
and then click [Open].
Windows 2000
1. Click [Start] → [Settings] → [Network and Dial-up Connections].
2. Double-click the [Local Area Connection] icon.
3. Click [Properties].
The "Local Area Connection Properties" window appears.
4. If [NetBEUI Protocol] is not listed, click [Install].
5. Click [Protocol] → [Add].
The "Select Network Protocol" window appears.
6. Click [NetBEUI Protocol] → [OK].
7. Click [Close].
8. Click [Close].
Windows NT 4.0
1. Click [Start] → [Settings] → [Control Panel].
2. Double-click the [Network] icon.
3. Click the [Protocols] tab.
To Next Page
Loading...
Need help?
General
