Oki C9600n Network And Configuration Guide

OkiLAN 8200e Network User’s Guide
214
Troubleshooting:
NetBEUI
The network interface card is not identified.
• Turn the printer off and on again.
• Make sure the network cable is correctly connected.
• Change the cable and try again.
• Make sure that [Microsoft network client] and [NetBEUI] have been
added to the network section of the control panel.
• Make sure the NetBEUI protocol is set to Enable.
• Make sure the factory setting of the workgroup name is PrintServer and
the computer name is ML+ the last six digits of the MAC address.
• Make sure the computer name of the NIC is different from the computer
name on the network.
Error writing to Prn1.
• Make sure the printer is online.
• If there is an error message indicating the paper has run out, add more
paper and cancel the error.
• Check whether another user is printing. Print after the other user has
finished.

Oki C9600n Specifications

General

Brand	Oki
Model	C9600n
Category	Printer
Language	English