Oki C9600n Network And Configuration Guide

OkiLAN 8200e Network User’s Guide
254
Calibration Menu
Item Value or
Submenu
Item
Value Description
Auto density
mode
ON
OFF
– Sets whether density adjustment and
TRC compensation is automatically
performed.
ON: density adjustment is
automatically run under the printer
specified conditions and reflected in
TRC compensation.
OFF: the printer does not carry out
density adjustment automatically.
Adjust
density
Execute – When Execute is selected, the printer
carries out density compensation
immediately and reflects it in TRC
compensation. Density adjustment
must be carried out when the printer
is idling.
Adjust
registration
Execute – When Execute is selected, the printer
carries out registration adjustment
automatically. Registration
adjustment must be carried out when
the printer is idling.
Print tuning
pattern
Execute – Allows you to print a pattern to help
you adjust TRC manually. (Normally,
TRC is automatically adjusted to the
recommended levels through density
adjustment and TRC compensation.)

Oki C9600n Specifications

General

Brand	Oki
Model	C9600n
Category	Printer
Language	English