OkiLAN 8200e Network User’s Guide
240
PCL Setup
Item Value Description
Font source Resident
DIMMO
Downloaded
Specifies the location of the PCL
default font.
DIMM0: displayed only when Font
DIMM ROM specially prepared fonts
are in the slot.
DOWNLOADED: displayed when
software font is downloaded to RAM
as permanent designation. Fonts
downloaded to Flash and HDD by
PJL command are not displayed in
this menu.
Font Number 10
C1
S1
Sets the PCL font number.
Font pitch 0.44 ~ 99.99 CPI
Default 10.00 CPI
Sets the width of the PCL default
fonts.
Font height 4.00 ~ 999.75
point
Default 12.00
point
Sets the height of the PCL default
font.
To Next Page
Loading...
Need help?
General
