Oki C9600n Network And Configuration Guide

OkiLAN 8200e Network User’s Guide
257
Printer Menu
Boot Menu
To access the Boot Menu:
1. Turn the printer off.
2. Press and hold the Enter key while turning the printer back on: be
sure to continue holding the Enter key until “Initializing” appears on
the display.
Parallel Setup
Item Value Description
Parallel Enable
Disable
Enables/Disables the Centronics
interface.
Bi-Direction Enable
Disable
Enables/Disables the bi-directional
Centronics interface.
ECP Enable
Disable
Enables/Disables the ECP mode.
Ack Width Narrow
Medium
Wide
Sets the ACK width for compatible
reception. Narrow = 0.5µs.
Medium = 1.0µs. Wide = 3.0µs
Ack/Busy
Timing
Ack in Busy
Ack while Busy
Sets order to output the BUSY and ACK
signals for compatible reception.
I-Prime 3 microseconds
50 microseconds
Disable
Sets the time to enable/disable the
I-PRIME signal.
Offline
Receive
Enable
Disable
When this is set to Enable, the interface
keeps the receive-possible state even
when you press the Off-line operating
panel switch. The interface sends the
BUSY signal only when the reception
buffer is full or a service call occurs.
PS only.

Oki C9600n Specifications

General

Brand	Oki
Model	C9600n
Category	Printer
Language	English