OkiLAN 8200e Network User’s Guide
191
e. Activate the print queue.
# /usr/sbin/accept PRINTER_lp
f. Enable the print queue
# /bin/enable PRINTER_lp
HP-UX 10.x Configuration
Check the IP Address, Subnet Mask and Gateway
If an incorrect IP Address, Subnet Mask or Gateway is entered, the
network may go down or other damage may occur. Check the address with
the network manager and confirm that the IP address of the printer has
been set.
Example Configuration
The following example uses HP-UX10.20 and an OKI printer as examples.
The absolute path and method of configuring commands may differ in other
versions of the OS. Refer to the workstation manual for more details.
1. Log in as [root] to the workstation.
NOTE
To customize output, for example to add additional
commands at the start of each print job, you can edit a copy
of the netstandard model file then add it using the lpadmin
command.
Example
For printer PRINTER_lp, with model file called
PRINTER0_model
# /usr/sbin/lpshut
# /usr/sbin/lpadmin –p PRINTER_lp –m
PRINTER_model
# /usr/sbin/lpsched
To Next Page
Loading...
Need help?
General
