OkiLAN 8200e Network User’s Guide
180
Printing from Novell NetWare:
Overview
The print server supports the Novell NetWare environment.
It is necessary to have NetWare Administrator or Supervisor rights to
change the configuration. This guide is for NetWare administrators. It
should be read in conjunction with the relevant Novell NetWare manual.
The latest Novell service packs and Novell client versions should be
installed.
Supported Versions and Modes
Remote Printer Mode
Remote Printer Mode requires a connection to be made to a workstation
running Pserver. Print jobs are received from the file server via the
NetWare print server. The network interface card emulates the workstation
on which the NetWare Rprinter operates. Remote Printer Mode adds
additional traffic to the network and is slower than Print Server Mode but
does not require any additional licenses.
Print Server Mode (Recommended)
In Print Server Mode, the file server is logged in and the printer queue is
repeatedly polled to determine whether a print job exists. The NetWare
print server or workstation where Pserver runs is emulated. This enables
high speed printing without applying a load to the network. Print Server
Mode requires a single user NetWare license.
iPrint
iPrint mode is supported by the OkiLAN 8200e. See your Novell NetWare
user manuals for information on using iPrint.
NetWare 6 Bindery, NDS, NDPS and iPrint
NetWare 5+ Bindery, NDS and NDPS
NetWare 4.1+ Bindery and NDS
NetWare 3.11 + Bindery
To Next Page
Loading...
Need help?
General
