7. Drive/Shutter
158
îš™
[More Settings] (Exposure Bracket)
îš™
[More Settings] (Aperture Bracket)
Example when the initial position is set to F8.0
1 1st image, 2 2nd image, 3 3rd image ... 7 7th image
[Step]
Sets the image count and exposure compensation step.
[3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record
7 images in 1 EV steps)
[Sequence] Sets the order in which images are recorded.
[Single Shot
Setting]
[]: Takes only one image each time the shutter button is
pressed.
[]: Takes all of the set number of images when the shutter
button is pressed once.
0 The bracket indication blinks until all of the set number of
pictures is taken.
0 This cannot be set when taking burst pictures.
If you press and hold the shutter button, burst pictures are
taken until the set number of images is recorded.
0 When you record images with Exposure Bracket after setting the exposure
compensation value, the images recorded are based on the selected
exposure compensation value.
[Image Count]
[3]/[5]: Records the set number of images while alternately
setting the aperture value in the sequence of one before and
then one after using the initial aperture value as the reference.
[ALL]: Records images using all aperture values.
0 If you press and hold the shutter button, burst pictures are
taken until the set number of images is recorded.
To Next Page
Loading...
Need help?
General
