10.18
9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.
BODY COMPONENT REMOVAL
SEAT REMOVAL
1. To remove any of the seats, lift upward on the latch
lever
q
located behind the seat bottom.
2. Lift upward and forward on the seat while lifting up on
the latch lever and remove the seat from the vehicle.
FRONT BUMPER REMOVAL
1. Remove the ten T-40 Torx screws retaining the front
bumper.
2. Disconnect the front headlight connectors.
3. Remove the ten Torx screws retaining the upper,
middle and lower portion of the bumper.
4. Pull out on the front bumper to remove the bumper,
headlights and radiator deflector as an assembly.
5. If replacing the front bumper, remove both headlights
and the radiator deflector.
REAR BUMPER REMOVAL
1. Disconnect the harness connectors at the tail lights.
2. Remove the zip ties retaining the harness to the rear
bumper.
3. Remove the seven (two lower and five upper) T-27
Torx screws retaining rear bumper to the cargo box.
4. Remove rear bumper from vehicle.
BODY / FRAME
To Next Page
Loading...
Need help?
General
