Polaris RZR 900 2016 Service Manual

2
9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.
2.13
ENGINE OIL LEVEL
The RZR 900 and 1000 engines have a wet-sump
design, meaning the engine oil is contained in the bottom
of the crankcase. To check the oil level, follow the
procedure listed below:
Access the oil dipstick through the opening in front of the
passenger rear tire.
Access the oil fill cap through the cargo box access
panel.
Polaris recommends the use of PS-4 Synthetic or PS-4
Extreme Duty Synthetic 4-Cycle Engine Oil.
FLUID CAPACITY
Recommended Engine Oil:
PS-4 (PN 2876244)
Ambient Temp Range: -35° F to 100° F
PS-4 Extreme Duty (PN 2878920)
Ambient Temp Range: 0° F to 120° F
Capacity: 2.5 Quarts (2.4 L)
1. Position vehicle on a level surface and place the
transmission in PARK.
2. Stop the engine and allow it to cool down before
removing the dipstick.
3. Remove the access panel between the seats to
access the dipstick.
4. Unlock the dipstick lever
q
. Remove the dipstick and
wipe it dry with a clean cloth.
5. Reinstall the dipstick and push it into place. Do not
lock the dipstick.
NOTE
Make certain the dipstick is inserted all the way into the
dipstick tube to keep the depth of the dipstick
consistent.
6. Remove the dipstick and check the oil level.
7. Add the recommended oil as necessary to bring the
oil level within the SAFE range on dipstick. Do not
overfill (see NOTE below).
NOTE
A rising oil level between checks during cold weather
operation can indicate contaminants such as gas or
moisture collecting in the crankcase. If the oil level is
over the upper mark, change the oil immediately.
8. Add engine oil through the oil fill cap
w
located on top
of the valve cover, under the cargo box access panel.
9. When finished, reinstall dipstick and lock the lever.
MAINTENANCE

Polaris RZR 900 2016 Specifications

General

Brand	Polaris
Model	RZR 900 2016
Category	Offroad Vehicle
Language	English