9.16
9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.
PARKING BRAKE DISC
Disc Inspection
Measure the brake disc with a micrometer. If the
thickness of the disc is less than specified, replace the
brake disc (see Chapter 9 – Disc Replacement, page ).
Disc Replacement
1. Remove the parking brake caliper from the disc (see
Chapter 9 – ).
2. Using a 1/2″ socket and ratchet, remove the brake
disc retaining bolt and flat washer.
3. Remove the disc from the transmission shaft.
4. Install the new brake disc. Install the mounting bolt
and flat washer. Torque the mounting bolt to
specification.
TORQUE
Parking Brake Disc Mounting Bolt:
14 ft-lb (20 Nm)
BRAKE SYSTEM